basket Place an order call Callback

backtop

brand brand brand brand
label
label
label
VENTO single-room energy recovery ventilation units with air-flow capacity up to 29 CFM and heat recovery efficiency up to 97%.
template template
Description
Description
product

Vento Expert A50-1 Pro features

• Arrangement of efficient energy-saving supply and exhaust single-room ventilation in ats, houses, cottages, social and commercial premises. • Reducing heat losses caused by ventilation due to heat recovery. • Humidity balance and regulated air exchange create individually controlled microclimate. • Coordinated network based on several integrated single-room ventilation units with central control.

product

Vento Expert A50-1 Pro heat and moisture regeneration

• Warm stale air is extracted from the premise, ows through the ceramic regenerator and transfers its heat energy and moisture to it. • As the ceramic regenerator gets warmed up, the unit switches to the supply mode. • Clean cold intake air flows through the regenerator and absorbs accumulated heat and humidity. • When the ceramic regenerator is cooled down, the unit switches to the extract air mode.

product

Vento Expert A50-1 Pro control

• Arrangement of efficient energy-saving, supply and exhaust, single-room ventilation in flats, houses, cottages, social and commercial premises. • Reducing heat losses caused by ventilation due to heat recovery. • Humidity balance and regulated air exchange create individually controlled microclimate. Wi-Fi communication between several single-room ventilation units for coordinated operation. • Controlled by Android or iOS smartphone or tablet.

product

Vento Expert A50-1 Pro mounting

• The unit is designed for through-the-wall installation inside a prepared hole in an outer wall of the building. • The best ventilation solution is pairwise installation of reverse phase connected units. Some units ensure supply of fresh air to the room and the other units extract air from the premise. This way the most ef cient balanced ventilation is arranged. In case of brand new construction, units are mounted in two stages: • Pre-installation at the stage of the indoor finishing and outer decorative wall nishing. It includes installation of an air duct, an outer ventilation hood and cable installation. • Final mounting before commissioning of a house. It includes installation of a regenerator with a fan and lters and mounting and wiring of an indoor unit with a controller and shutters.

product

Vento Expert A50-1 W control

• The units can be connected by Wi-Fi for synchronized operation. • The units can be connected by Wi-Fi Blauberg Vento app for Android or iOS devices is available at Google Play and App Store.

product

Vento ECO2 A50 Pro features

• Arrangement of efficient energy-saving supply and exhaust single-room ventilation in ats, houses, cottages, social and commercial premises. • Air purification with optional MERV14 filter PM2.5 99 %. • Protection from outdoor noise. • Reducing heat losses caused by ventilation due to heat recovery. • Humidity balance and regulated air exchange create individually controlled microclimate.

product

Vento ECO2 A50 Pro design

• Internal grille with manually actuated shutters and a decorative panel. • Air duct • Ceramic energy accumulator (regenerator) • Reversible fan with EC motor • Outer grille • Noise insulating layer

product

Vento ECO2 A50 Pro control

• Control of the unit operation mode is performed by means of sensor control panel located on the unit casing or a remote controller. • Low voltage (12 V) power supply between control panel and VENTO Eco2 units.

product

Vento Expert DUO A30-1 Pro features

• Arrangement of efficient energy-saving supply and exhaust single-room ventilation in ats, houses, cottages, social and commercial premises. • Reducing heat losses caused by ventilation due to heat recovery. • Humidity balance and regulated air exchange create individually controlled microclimate. • Coordinated network based on several integrated single-room ventilation units with central control.

Vento Expert A50-1 Pro features
Vento Expert A50-1 Pro heat and moisture regeneration
Vento Expert A50-1 Pro control
Vento Expert A50-1 Pro mounting
Vento Expert A50-1 W control
Vento ECO2 A50 Pro features
Vento ECO2 A50 Pro design
Vento ECO2 A50 Pro control
Vento Expert DUO A30-1 Pro features
Downloads
Downloads
VENTO VIDEO
VENTO VIDEO
Product details
Product details

VENTO Expert and VENTO ECO – high efficiency HRV for your home


The single room ventilators VENTO Expert and VENTO ECO series are practical and economical solutions for efficient air exchange with energy recovery in separate rooms of residential, or commercial premises.

Ventilators of this series can save you energy. They provide heat recovery in the premises thanks to the technology of recuperation, and the use of a special ceramic energy recuperator.

VENTO’s operate on the in two modes, supply & extract, each process lasts 70 seconds. In cold weather, the air is exhausted from the room and transfers some of its heat to the recuperator, and when the unit is running on the supply, fresh air from the street is heated, passing through this recuperator. In warm weather, the exhaust air cools the warm air from the street. In VENTO Expert DUO, the inflow and exhaust are simultaneous, because the unit is equipped with two fans and an airflow separator. Thanks to the special hexagonal structure of the cells regenerator, the units of the series demonstrate one of the highest regeneration efficiency parameters - up to 97%.

Various adjustable modes of operation of the unit, as well as fine filters with antibacterial coating, which pre-clean the supply air from dust, all kinds of vapors, gases and other harmful substances, will help to ensure an optimal microclimate in the room.

VENTO’s can operate in ventilation or regeneration modes, night mode or "party", providing an optimal microclimate in the room.

Models VENTO Expert A50-1 W and VENTO Expert DUO A30-1 W are equipped with Wi-Fi-module. Adjusting these fans is easy and convenient, just download the Blauberg VENTO app on the phone in the App Store or Google Play Market. And by means of Wi-Fi it is possible to remotely control the operation of several units.

These small recovery units do not require any additional elements or ducting of the duct system, they are installed directly into the outer wall of the building.

For installation, a through hole is necessary in the wall, into which the unit itself is mounted. The decorative faceplate VENTO is placed on the interior wall, and on the outside - the outer cap of the unit, which protects against the ingress of water and foreign objects into the fan.

The ventilators of this series are equipped with energy-efficient EC-motors, which are characterized by high efficiency, low noise level, demonstrate minimal energy consumption, and long service life.

VENTO’s can be used to organize the ventilation system "energy-saving home". Several synchronously operating units will create high efficiency ventilation with heat in your home.